Olympus FL-900R - Wireless Flash Control; Controlling the Flash Remotely; Placing Wireless Flash Units

30
EN
Wireless control
is
available
with Olympus digital
cameras that support
RC
mode.
The unit
is
controlled
by means
of
a flash mounted
qn
the camera.
It can also
be
mounted on a camera for
wireless control
of
multiple
remote flash units.
• Since
the communication is performed with the flash emission
of
the camera,
the flash positioning range varies with camera. For information on cameras that
support this system, see the camera
manu~l.
Controlling the Flash RemotelY.,_
_________
_
Flash Settings
1
Select
RC
mode on the camera.
2
Choose [RC] as the flash
control
mode
(P.
26).
•
Press
MODE
and rotate the
dial
to select
a flash
control
mode.
3
Use the flash to select
the
channel
and group.
• Highlight settings using
<l
[>
and rotate the
dial
to change.
r:r;:·~r~=,
Value~
Set
[!]3
r:~r;:·'~J
Value~
Set
[!]3
The camera can adjust flash settings
separately
for
up to 3 groups; choose the group to which the flash
belongs.
Set
the camera and
flash
to the same
channel.
4 Press
the
OK
button to put the changes into effect.
•
Settings for each group,
Including
flash
control
mode, flash
level,
and flash
compensation, can be adjusted from the camera.
Placing Wireless Flash
Units
1
Attach the stand provided.
•
Keeping the
latch release
pressed,
slide the
latch
in
the direction opposite to that shown by the
[LOCK~]
arrow to
undo the
latch
(G)).