Olympus FL-900R - Using the Flash to Control Other Units

• Slide
the
flash securely
onto the
stand(@).
• Slide the
latch
to the
[LOCK
..,._
] position to
latch the
flash
in
place.
•
To
remove the flash, undo the
latch
and
slide the
unit from the stand
__
2 Position the
flash with the remote sensor facing the camera.
•
We recommend using a
single group
of
up to three remote flash units.
•
Take a test shot after positioning.
• Flash
may not fire due to the
angle or distance between the camera and
the object.
Using the Flash
to
Control
Other Units
Adjusting Camera and Flash Settings
1
Attach the flash to the camera
(P.
24
).
2
Select RC mode on the camera.
3
Choose [TTL-AUTO] as the flash control
mode
(P.
26).
..
[:*n-1
Value
l!l1".i.B
Set
ID:t
31
EN