Nomenclature & Functions
i--SPEED 15
3.2 Power Supply/Mains cable
Mains power cable
Power connector
1. Power cable
The 12VDC Power supply is supplied with the appropriate AC
mains power cable. The power supply unit MUST be earthed
and it is recommended that the mains power cable supplied is
used to maintain standards compliance.
2. Power connector
Connects to the ‘power’ socket of the camera and provides
power to the camera and its controller unit.
The user must ensure that only the power supply
unit supplied with the Olympus i--SPEED is used
and that this unit is only used to power the
camera.
The memory in the camera will be erased if
power is lost.
To Next Page
Loading...
