9
EN
Using basic functions
Taking photographs (
P
mode)
1
Press the n button to turn on the camera.
When the camera is turned on, the monitor will turn on.
2
Set the mode dial to P.
In mode P, the camera automatically
adjusts shutter speed and aperture in
response to subject brightness.
3
Frame the shot.
• When holding the camera, take
care not to cover the flash,
microphone or other important
parts with your fingers, etc.
4
Press the shutter button
halfway down to focus.
The focus indicator will blink to
show that the camera is not in
focus. Focus again.
• The shutter speed and
aperture displays will blink
to show that the camera is
unable to achieve optimal
exposure.
Press halfway
125
01:02:0301:02:03
10231023
P
125 F5.6
±
0.0
±
0.0
L
N
F
FHD
30p
30p
ISO-A
200
S-IS
ON
S-IS
ON
Shutter
speed
Aperture
value
Focus indicator
5
To take the picture, gently
press the shutter button all the
way down while being careful
not to shake the camera.
Press
halfway
Press the rest of
the way down