1 | Setup
2 | Power-Cord Attachment
3 | Power On
Setup with Suction Module Setup without Suction Module
Ensure the console is properly assembled onto an IV pole before use. To reduce the risk of tipping and possible equipment
damage, always follow the recommended height guidelines shown above.
The power cord needs to be attached to the back of the unit
and to a grounded wall outlet.
Turn the InstaClear system on by pressing the power button
at the lower left corner on the front of the console. The
power switch will illuminate.
15461
1.57 m
maximum
1.3 m
maximum
Attach power cord
Turn the
Console On
15455
1545715448
To Next Page
Loading...
Need help?
General
