Olympus LS-12 - Using the Metronome Function

2
2
Recording
36
EN
Recording
a
5
Press the
9
or
0
button to
adjust the recording level.
• You can adjust the recording level by using
the
9
or
0
button depending on the
volume level during playback.
6
Press the REC (
s
) button to start
recording.
• Playback will start again from the beginning.
Recording will start at the same time.
7
Press the STOP /
w
(
4
) button to
stop recording.
Notes
• When the original playback file ends, overdubbing
also ends.
• When the [ OVER DUB ] function is used, the
following functions cannot be used.
• [ DIVIDE ] (
☞
P.34)
• [ Pre-Recording ] (
☞
P.68)
• [ Metronome ] (
☞
P.68)
Using the metronome function
The metronome is a useful rhythm guide and can be
used during recording.
1
Set the metronome function
(
☞
P.68).
• Set [ Rec Monitor ] to [ On ] (
☞
P.68).
2
Press the F1 ( METRONOME ) button
while recording or pausing.
• Turn the metronome ON or OFF by pressing
the F1 ( METRONOME ) button.
a
Metronome
• The metronome works with the current
settings. The sound of the metronome will
not be recorded.
• The LED indicator lights on the recorder
light in time with the metronome.