Why Olympus LS-12 won't start?
Your Olympus Microcassette Recorder might not start because of a few reasons: the battery power could be low, so try replacing it with new batteries; the power might be off, so ensure you turn it on; or the recorder could be in HOLD mode, so release it from HOLD.
What to do if nothing appears on the Olympus LS-12 Microcassette Recorder display?
If nothing appears on the display of your Olympus Microcassette Recorder, it could be due to a few reasons. First, verify that the battery polarities are correct. Second, the battery power might be low, so replace it with new batteries. Finally, ensure that the power is turned on.
Why Olympus LS-12 Microcassette Recorder recording level is too low?
If the recording level on your Olympus Microcassette Recorder is too low, it could be due to several factors. First, the recording level might not have been adjusted, so adjust it and try recording again. Second, the recording sensitivity might be too low, so set [ Mic Gain ] to [ Hi ] or [ Mid ]. Finally, if you are using external devices, the output level for those devices might be too low, so adjust their output level.
What to do if Olympus Microcassette Recorder has no playback sound?
If you hear no playback sound from your Olympus Microcassette Recorder, check if earphones are connected and unplug them to use the built-in speaker. Also, ensure the volume level isn't set to [ 0 0 ] and adjust it accordingly.
How to fix Olympus LS-12 Microcassette Recorder unable to record?
If your Olympus Microcassette Recorder is unable to record, it might be due to low remaining memory. Try erasing unnecessary files. Alternatively, the maximum number of files might have been reached, so move files to a different folder or delete unnecessary ones.
Why Olympus LS-12 Microcassette Recorder unable to record through the external microphone?
If your Olympus Microcassette Recorder is unable to record through the external microphone, it might be because an external device is connected to the LINE IN jack, so disconnect the connecting cord from the recorder. Another reason could be that an external microphone that must be supported by plug-in power is connected, but [ Plug-in Power ] is set to [ O ff ]. Set [ Plug-in Power ] to [ On ] when using such a microphone.
Describes the recorder's key features like SMART mode and Tresmic system.
Details the SMART mode for recording and the Tresmic microphone system.
Details the physical buttons, ports, and indicators on the recorder.
Explains the information shown on the recorder's LCD screen during operation.
Guides on inserting and ejecting SD cards for data storage.
Details the physical buttons, ports, and indicators on the recorder.
Instructions on how to insert AA alkaline batteries into the recorder.
Explains how to use the POWER/HOLD switch to turn the device on and off.
Explains the different recording modes ([QUICK], [SMART], [MANUAL]).
Explains how to play back WAV and MP3 files and transfer them from a computer.
How to select files, start playback, adjust volume, and stop playback.
Explains how to forward playback and use earphones for listening.
Details how to rewind, skip files, and locate the beginning of files.
Options for editing files including move/copy, lock, divide, erase, and trim.
Lists options for managing files: Move/Copy, File Lock, File Divide, Partial Erase, Trimming, Property.
How to move or copy files within or between the recorder's memory.
Procedures for erasing single files or multiple files at once.
Guide on formatting the recorder to erase all data and reset settings.
Step-by-step instructions for connecting the recorder to a PC via USB.
How to safely disconnect the recorder from the PC (Windows and Macintosh procedures).
Instructions on copying recorded files from the recorder to a PC.
Guides on resolving issues like no display, won't start, unable to record, or low recording level.
Solutions for high recording levels, stereo recording, folder issues, and noise during playback.
Contact information for technical support and declaration of conformity.
General| Recording modes | Pulse-code modulation (PCM) |
|---|---|
| Built-in microphone | Yes |
| Maximum recording time | 52 h |
| Audio formats supported | MP3, PCM, WAV |
| HQ mode frequency response | 20 - 23000 Hz |
| LP mode frequency response | 20 - 17000 Hz |
| SP mode frequency response | 20 - 13000 Hz |
| SHQ mode frequency response | 20 - 44000 Hz |
| SLP mode frequency response | 20 - 20000 Hz |
| Internal memory | 2048 MB |
| Display diagonal | 1.83 \ |
| Display size (HxV) | 30.1 x 35.4 mm |
| Loudspeaker diameter | 28 mm |
| Number of built-in speakers | 1 |
| Interface | USB |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| FM radio | - |
| Media types supported | Internal memory & flash card |
| Compatible memory cards | SD, SDHC |
| Built-in memory capacity | 2 GB |
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Compatible battery sizes | AA |
| Product color | White |
| Languages support | CZE, DAN, DEU, DUT, ENG, ESP, FRE, ITA, POL, RUS, SLV, THA |
| Microphone input impedance | 2000 Ω |
| Mac operating systems supported | Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion |
Weight and Dimensions| Depth | 23.5 mm |
|---|---|
| Width | 52.5 mm |
| Height | 138.7 mm |
| Weight | 170 g |
To Next Page
