OTF AUTO LIGHT METERING
The OM-3Ti has manually selectable shutter speeds. But
combined with a T-series flash, the camera also provides
full control of flash lighting via OTF auto light metering.
This system automatically controls flash intensity while
directly metering the flash
lighting being exposed on film.
For this reason, there is no
deviation between the
metering area of the flash
sensor and the area actually
exposed. Moreover, all
aperture settings can be used. So advanced techniques
such as multi-flash and bounce-flash are at your
command, and are all fully automatic. Moreover,
troublesome exposure calculation in macro photography
is completely eliminated.
Center-weigh ted
average light metering is
also used in flash
shooting.
56
To Next Page
Loading...
