OTF AUTO FLASH
OPERATION OF T-SERIES FLASH
With a T-series flash on the camera, the flash mode will
automatically switch according to the camera mode.
If you take pictures in the auto mode, set the camera's
mode lever to "TTL AUTO FLASH". When the green LED
turns on in the viewfinder, the flash is ready for firing.
Shoot using 1/60-sec. or slower shutter speed. If you take
pictures in the manual mode, set the camera's mode
lever to "X" and select 1/60-sec. or slower shutter speed.
Flash strength is always at full emission. For more
information, refer to the flash's instruction manual.
<OTF AUTO FLASH MODE>
± exposure compensation possible.
The required quantity of light is also adjusted
depending on the amount of compensation.
Lights up when the flash
is fully charged; blinks on
correct flash firing
80
To Next Page
Loading...
