En
15
Connecting the camera
Use the AV cable provided with the camera to playback recorded images on your
TV. Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the multi-connector
on the camera to the video input terminal on the TV using the AV cable.
2 Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s instruction manual.
3 Set the mode dial to q, and press o to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad (srpq) to select
the picture you want to display.
Playback on a TV
AV cable Multi-Connector
Connector cover
Connect to the TV’s video
input (yellow) and audio
input (white) terminal.
4322_basic_e.book Page 15 Tuesday, July 18, 2006 9:45 PM
To Next Page
Loading...
