Olympus SP-510UZ - Direct Printing (Pictbridge)

En
16
Using the provided USB cable, you may connect your camera directly to a
PictBridge compatible printer such as the Olympus P-11 to make prints. You can
print a picture with simple operations.
1 In playback mode, display the picture you want to print out on the monitor.
2 Connect one end of the provided USB cable into the camera’s multi-connector
and the other end into the printer’s USB connector.
3 Press h/<.
Printing starts.
When printing is finished, disconnect the USB
cable from the camera with the picture selection
screen displayed.
Direct Printing (PictBridge)
USB Cable
h/< Button
PC / CUSTOM PRINT
EASY PRINT START
OK
4322_basic_e.book Page 16 Tuesday, July 18, 2006 9:45 PM