15
En
Connecting the camera
Use the AV cable provided with the camera to playback recorded images on your
TV. Both still pictures and movies can be played back.
1 Make sure that the TV and camera are turned off. Connect the
multi-connector on the camera to the video input terminal on the TV
using the AV cable.
2 Turn the TV on and set it to the video input mode.
For details of switching to video input, refer to your TV’s
instruction manual.
3 Set the mode dial to q, and press o to turn the camera on.
The last picture taken is displayed on the TV. Use the arrow pad
(124 3) to select the picture you want to display.
Playback on a TV
Connect to the TV’s
video input (yellow)
and audio input
(white) terminals.
AV cable
Connector cover
Multi-connector
d4321_basic_e.book Page 15 Tuesday, December 19, 2006 2:20 PM
To Next Page
Loading...
