16
En
Using the provided USB cable, you may connect your camera directly to a
PictBridge compatible printer to make prints. You can print a picture with simple
operations.
1 In playback mode, display the picture you want to print out on the
monitor.
2 Connect one end of the provided USB cable into the camera’s
multi-connector and the other end into the printer’s USB connector.
3 Press q.
Printing starts.
When printing is finished, disconnect
the USB cable from the camera with the
picture selection screen displayed.
Direct Printing (PictBridge)
Multi-connector
USB cable
Connector cover
q Button
PC / CUSTOM PRINT
EASY PRINT START
OK
d4321_basic_e.book Page 16 Tuesday, December 19, 2006 2:20 PM