Olympus STF-8 - Preparing for Shooting; Preparing and Loading Batteries; Attaching the Macro Flash to the Camera

18
EN
Preparing for Shooting
Preparing a Battery (Sold Separately)Preparing a Battery (Sold Separately)
Choose from the below batteries:
• AA (R6) NiMH batteries (× 4) • AA (R6) alkaline batteries (× 4)
AA (R6) manganese batteries cannot be used.
Loading BatteriesLoading Batteries
1 Open the battery
compartment cover.
2 Insert the batteries with
correct +/– polarity.
3 Close the battery
compartment cover.
1
2
Attaching to the CameraAttaching to the Camera
Confi rm that both the camera and the macro fl ash are off. Attaching or removing
the macro fl ash while either the fl ash or the camera is on may result in
malfunction.
1 If the screws on the joints are
tightened, loosen them (
1
).
2 While holding down the buttons on
both sides of the joint (
2
), attach
the joint to the lens ring (
3
).
• Choose the lens ring whose size
matches the fi lter diameter of the lens
to be used.
3
2
1