Olympus STF-8 - Wireless Control of Remote Flash Units; Shooting with a Non-Olympus Camera

26
EN
Wireless Control of Remote Flash UnitsWireless Control of Remote Flash Units
This product can connect to Olympus digital cameras that support RC mode for
wireless control of multiple remote fl ash units. For information on cameras that
support the RC mode, see the camera manual.
1 Attach the macro fl ash to the camera
and set the mode dial to
.
• RC mode can be used even when the mode
dial setting is not
, but the settings on the
macro fl ash take precedence when determining
the fl ash behavior.
2 Set the RC mode-compatible fl ash you want to control to RC mode
and set it up.
• See the fl ash manual for details.
3 Set the camera to RC mode, and confi gure the fl ash control mode
and other settings.
• See the camera manual for details.
• This product does not support Super FP fl ash.
Shooting with a Non-Olympus Camera Shooting with a Non-Olympus Camera
If it is not possible to communicate with the camera to control the fl ash, set the
fl ash output manually.
1 Set the fl ash output by setting the
mode dial on the macro fl ash to
between 1/1 and 1/128.
2 Press the shutter button to take the
picture.