Olympus Stylus 500 - Setting the Print Paper Items; Selecting Pictures You Want to Print

Direct printing (PictBridge)
107
Printing pictures
8
This setting varies depending on the type of printer you use. If only the printer’s
standard setting is available, you cannot change the setting.
SIZE : Sets the paper size that the printer supports.
BORDERLESS: Selects whether the picture is printed on the entire page or inside a blank
frame.
PICS/SHEET : Select the number of print same picture on one page. Displayed when you
have selected [MULTI PRINT].
Select pictures you want to print. The selected pictures can be printed later (single-
frame reservation) or the picture you are displaying can be printed right away.
PRINT (e):
Prints the currently displayed picture. If there is a
picture that [SINGLE PRINT] reservation has
been already applied to, only the picture with
reservation will be printed.
SINGLE PRINT (a):
Applies print reservation to the currently displayed
picture. Press b
d to select other pictures if you
want to apply reservation for further pictures.
MORE (c):
Sets whether you print the number of prints and
other data of the currently displayed picture.
g“Setting printing data” (P.108)
Setting the print paper items
Selecting pictures you want to print
PRINTPAPER
SIZE
BORDERLESS
STANDARD
STANDARD
SELECT GO
OK
CANCEL
PRINTPAPER
SIZE
PICS/SHEET
STANDARD
16
SELECT GO
OK
100
100
- 0030
0030
PRINT
PRINT
OK
OK
OK
MORE
MORE
SELECT
SELECT
PRINT
MORE
SINGLE PRINT
SINGLE PRINT
SELECT
SINGLE PRINT