Selecting a shooting mode according to the situation
36
3
Basic shooting functions
Lets you select an image out of a sequence of still pictures you have taken
by depressing the shutter button and store it.
This is best for shooting moving objects.
SHOOT & SELECT 1 Shoots a rapid succession of 4 still pictures by
keeping the shutter button pressed.
SHOOT & SELECT 2 Shoots a succession of still pictures by keeping the
shutter button pressed.
1 Press the a (f) button.
2 Select [SHOOT & SELECT 1] or
[SHOOT & SELECT 2] and press
e.
3 Take the picture.
• After shooting, the screen to select which
picture(s) to erase will appear.
4 Select the picture to erase and
press a.
• If you want to erase other pictures, repeat
Step 4.
5 After you decided the picture to
erase, press e.
6 Select [YES] and press e.
SHOOT & SELECT shooting
Note
• If you selected [SHOOT & SELECT 2], you can take up to approximately 200
still pictures as long as the shutter button is depressed.
• If you did not select the picture to erase, all taken pictures will be stored in the
card.
Mode dial
f button
OK
OK
SELECT GO
S
( ) will be displayed on the
selected pictures.
The picture with cursor will be displayed
enlarged.
To Next Page
Loading...
