94
7
Settings
Power on setup
You can select a picture and/or sound volume to be displayed/output when
the power is turned on. You can also register your favorite picture and
display it on the screen. g“Screen setup” (P.95)
Top menu [MODE MENU] [SETUP] [PW ON SETUP]
g“Menus” (P.15)
1 Select [OFF], [1] or [2] for
[SCREEN], then press b.
OFF No picture is displayed.
1 A picture is displayed.
2 The registered picture is displayed.
If there is no registered picture,
nothing is displayed.
2 Select [OFF], [LOW] or [HIGH] for
[VOLUME], then press
b
.
OFF No startup sound is output.
LOW/HIGH Startup sound is output.
3 Press e.
Note
• [OFF] cannot be selected for [VOLUME] when [SCREEN] is set to [OFF].
Mode dial
PW ON SETUP
SCREEN
VOLUME
OFF
1
2
SELECT GO
OK
PW ON SETUP
SCREEN
VOLUME
OFF
LOW
HIGH
SELECT GO
OK
To Next Page
Loading...
