Olympus Stylus 7000 - Creating Panoramic Images; Pre-Capture Movie & Panorama Combinations

Refer to "Using the Menu" (p. 3) when adjusting the settings of these functions.
~:OSCN
Creating panoramic images
1&3 PANORAMA)
~ PANORAMA
Three frames are taken and
combined by the camera. The user
composes the shots using the guide
frame and manually releases the
shutter.
The frames that were taken are
combined into a panorama image
using the OLYMPUS Master 2
software from the provided CD-ROM.
Pictures are taken
in the last [ISO)
or
[~ SCENE MODEj settings.
(Excluding certain scene modes.)
Three frames are taken and
combined by the camera. The user
only composes the shots so that the
target marks and pointers overlap,
and the camera automatically
releases the shutter. The shooting
functions are already preset to the
optimum settings for panoramic
shooting.
COMBINE
IN PC
COMBINE IN
CAMERA 2
Capturing the perfect moment when
~shooting ([.PRE-CAPTURE MOVIE]
mode)
(D Use '\i7 QU to select [IBPRE-CAPTURE
MOVIE], and press the
iii button to set.
• This function is ready for shooting immediately
after setting this option.
:i> Press the shutter button to start movie
shooting.
• After shooting stops, the camera saves a
7-second movie, including up to 2 seconds of
recording time taken before the shutter button
was pressed, to
the memory card.
• The optical zoom and auto focus function are
available during movie recording.
aD Sound is not recorded.
aD The AF target mark is not displayed.
aD Select [IMAGE SIZE] from [VGA] or [QVGA],
and select [FRAME RATE] from [30fps]
or
[15fps].
'1 Not available in SCN mode (p. 17).
o The [ .. IMAGE QUALITY] (p. 25) setting
cannot be changed.
(/) The focus, exposure (p. 20), zoom position
(p. 19),
and [WBj (p. 26) are locked at the first
frame.
o The flash (p. 19) is fixed to (t\ (FLASH OFF)
mode.
o "Playing back panorama images" (p. 24)
EN