Taking pictures with
[COMBINE
IN
CAMERA 1]
CD
Press the shutter button to take the first
frame.
® Move the camera slightly
in
the direction of
the second frame.
Target mark
Pointer
Screen when combining
images from left to right
Taking pictures with
[COMBINE IN CAMERA 2]
CD
Use
~~
to specify at which edge the next
picture is to be connected.
Direction for
combining the
next frame
® Press the shutter button to take the first
frame.
• A guide frame appears
as
a reference.
1st frame
Guide frame
Composition
of
the 2nd frame
Joint area
@ Press the shutter button to take the next
shot.
CD
To
combine only
two
pictures, press the
~
button before taking the third frame.
® Repeat steps @ and @ to take a third
frame.
@ Compose the next shot so that the
joint area overlaps the guide frame.
11)
To
combine only two pictures, press the
~
button before taking a third frame.
@ Repeat Step @ to take a third frame.
• After the third frame
is
taken, the camera
automatically processes the frames
and
the
combined panorama image
is
displayed.
e
To
exit the panorama function without saving
an image, press the
MENU
button.
(1)
If
the shutter
does
not automatically release,
try
[COMBINE
IN
CAMERA
2]
or
[COMBINE
IN
PC].
@ Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
• The camera releases
the
shutter automatically.
• After the third frame
is
taken, the camera
automatically processes the frames
and
the
combined panorama image
is
displayed.
o
To
exit the panorama function without saving
an image, press the
MENU
button.
To Next Page
Loading...
