Adjusting
the
brightness
of
the
monitor
[!gj]
~
SETUP
~
101
.....
To
adjust
the
monitor
brightness
CD
Use
'Wau
to adjust the brightness while
viewing the screen, and then press the
~
button.
Setting
the date
and
time
for
another
time
zone
[DUALTIME]
~
SETUP
~
DUALTIME
o When [OUALTIME] is set to [ON], the date and
time set here are used
in
image file names,
dated prints and other data.
Switches to the date and
time set
in
[<2)].
The date and time settings
from [DUALTIME] are used
in file names, dated prints
and other data.
Information about the vertical!
horizontal orientation of the camera
during shooting is not recorded with
images. Images shot with the camera
in a vertical position are not rotated
during playback.
(Proceeds to
the setting
screen".)
OFF
ON
OFF
o During shooting, the
[0]
(p.35) setting on the
playback menu is set automatically.
This function may not work properly if the
camera is facing upwards
or
downwards during
shooting.
Automatically
rotating
images
shot
with
the camera
in
a
vertical
position
during
playback
[PIC ORIENTATlON]
~
SETUP
~
PIC ORIENTATION
" The setting procedure is identical to that
in
"Setting the
date and time"
(p.
13).
The
date display order is the same as that set
with
[<2)].
CANCEL.~
Date order
-+--------~
To
select
the
date and
time
display
order
CD
Press
~
after setting Minute, and use <;17
au
to
select the date display order.
(J)
"Setting the date and time" (p. 13)
Setting
the date
and
time
[f!}]
~
SETUP
~
<2)
ON
Information about the verticall
horizontal orientation of the camera
during shooting is recorded with
images. Images are automatically
rotated during playback.
40
EN
To Next Page
Loading...
