Refer
to
"Using
the
Menu"
(p. 3
when
adjusting
the
settings
of
these
functions.
Selecting
the
video
signal
system
to
match
your
TV
[VIDEO
OUT]
)1f SETUP
~
VIDEO OUT
!aJ
The
TV
video signal system varies depending on the countries and regions. Before viewing camera
images on your
TV,
select the video output according to your TV's video signal type.
The camera
is
compatible with TVs
in
Europe, China and others.
The camera is compatible with TVs
in
North America, Taiwan, Korea, Japan and others.
PAL
--------'--------------'---------------"'----'--~-----------------
o The factory default settings differ according to the region where the camera is sold.
'To
play
back
camera
images
on
a TV
CD
Connect the
TV
and camera.
• Connection
via
AV
cable
Connector cover
Open the connector cover
in
the direction
of
the arrow.
Connect to the TV video
i-:!!!"'T+i-
Multi-connector input jack (yellow) and
audio input jack (white).
NV
cable (supplied)
• Connection
via
HDMI
cable
Connector cover
Open the connector cover
in
the direction of the arrow.
H!H-\1+-
HOMI
mini connector
Connect to the
HOMI
connector
on
the
TV.
HOMI
cable (commercially available)
® Use the camera to select the video signal format that matches that
of
the connected TV
([NTSC]/[PAL]).
@ Turn on the
TV,
and change "INPUT" to "VIDEO (an input jack connected to the camera)."
CD
For details on changing the input source
of
the
TV,
refer to the TV's instruction manual.
CD
Set the mode dial to
I:EJ
when connecting via
an
AV cable.
CD
Use an HOMI cable that matches the HOMI mini connector on the camera and the HOMI connector on the
TV.
())
The movie playback screen cannot be displayed when connecting via an HOMI cable. In addition, the
sound will not be played.
(})
When the camera and
TV
are connected by both an AV cable and an HOMI cable, the HOMI cable will take
priority.
CD
Oepending on the TV's settings, the displayed images and information may become cropped.
EN
41
To Next Page
Loading...
