13
Button operations
1
Display the picture you want to erase one by one in the playback mode and press
the 2Y/S button.
• Once erased, pictures cannot be restored. Check each picture before erasing
to avoid accidentally erasing pictures you want to keep.
g“0 Protecting pictures” (P. 26)
• A single image cannot be erased during the close-up playback / index playback.
Press the 4& button in shooting mode to select the macro mode.
Press o for setting.
• Zoom and flash cannot be used in super macro mode.
Press the /< button.
The monitor will be set to the brightest state set in [s].
g“s Adjusting the monitor brightness” (P. 34)
When the printer is connected to the camera, display a picture to be printed out
in playback mode and press the /< button.
g“EASY PRINT” (P. 38)
Erasing pictures
b 4& button Shooting pictures close to the subject
& Macro mode This mode lets you shoot from as close as
20cm/7.8 in. (when the zoom is set for the
zoom-out angle) and as close as 30cm/11.8
in. (when the zoom is set for the zoom-in
angle) to your subject.
% Super macro mode This mode lets you shoot from as close as
7 cm/2.7 in. to your subject. If the distance
between the camera and the subject is over
50 cm/19.6 in., the picture will be out of
focus.
c /< button Brighten the monitor/Printing pictures
Making the monitor brighter
Printing pictures
To Next Page
Loading...
