19
Menu operations
2
[e SHOOT & SELECT1] / [f SHOOT & SELECT2]
•
Press and hold the shutter button to shoot sequential pictures. After shooting
pictures, select the ones you want to erase, put the
R
to them, and press
2Y
/
S
button to erase them.
4 CAMERA MENU
WB
......................................................................... Adjusting the color of a picture
AUTO The white balance is adjusted automatically for natural
color, regardless of the light source.
5 Sunny day For shooting under a clear sky.
3 Cloudy day For shooting under a cloudy sky.
1 Tungsten light For shooting under tungsten lighting.
w Fluorescent
lamp 1
For shooting under daylight fluorescent lighting. (This
type of lamp is mainly used in homes.)
x Fluorescent
lamp 2
For shooting under a neutral white fluorescent lamp.
(This type of lamp is mainly used in desk lamps.)
y Fluorescent
lamp 3
For shooting under a white fluorescent lamp. (This type
of lamp is mainly used in offices.)
ISO..............................................................................Changing the ISO sensitivity
AUTO Sensitivity is automatically adjusted according to the conditions
of the subject.
80/100/200/
400/800/
1600
A low value lowers the sensitivity for daylight shooting of clear,
sharp pictures. The higher the value, the better the camera’s
light sensitivity and ability to shoot with a fast shutter speed and
in low light conditions. However, high sensitivity introduces noise
into the resulting picture, which may give it a grainy appearance.
ee
OK
S
BACK GO
MENU
Selected picture
Press 43 to scroll through the pictures.
Pictures with a
R mark are erased.
Select the pictures to be erased.
To Next Page
Loading...
Need help?
General
