53
Connecting the camera to a computer
4
2 Make the following preparations for disconnecting the USB
cable.
Windows 98SE
1 Double-click the “My Computer” icon and right-click
the “Removable Disk” icon to display the menu.
2 Click “Eject” on the menu.
Windows Me/2000/XP
1 Click the “Unplug or Eject Hardware” icon in
the system tray.
2 Click the message that is displayed.
3 When a message is displayed saying that the
hardware can be ejected safely, click “OK”.
Macintosh
1 The trash icon changes to the eject icon when
the “Untitled” or “NO_NAME” icon on the
desktop is dragged. Drag and drop it on the eject
icon.
3 Disconnect the USB cable from the
camera.
Note
• Windows Me/2000/XP: When you click “Unplug or Eject Hardware”, a warning
message may be displayed. Make sure that image data is not being downloaded
from the camera and that all applications are closed. Click the “Unplug or Eject
Hardware” icon again and disconnect the cable.
To Next Page
Loading...
Need help?
General
