Olympus SZ4045 - C. REPAIR PROCEDURE; 1. MIRROR REPLACEMENT

SZ-TRU
C. REPAIR PROCEDURE
1. MIRROR REPLACEMENT
* 2
~__-CD
*1~
(Swing side)
(Straight tube side)
Mirror surface
1-1 Remove the lever<!) .
SCREW+ 2 pes. (*1)
1-2 Remove the BASE @ .
SCREW+ 2 pes. (*2)
1-3 Remove two mirrors® ..
*Bonded with silicon KE45 (black).
1-4 Attach the mirror.
C-l
* The direction of mirror surface
is different in the straight tube
side and the swinging side.
* Apply an adhesive to both sides
of the mirror.
Adhesive Silicon KE45 (black)