How to remove dust visible in the field of view of Olympus SZX-R?
If dust is visible in the field of view, check if there is dust on the specimen and remove it. Also, check the eyepiece for dust and remove it.
Why is the field of view cut off or unevenly illuminated on my Olympus SZX-R Microscope?
The field of view may be cut off or unevenly illuminated because the aperture iris diaphragm is stopped down excessively. To fix this, open the aperture. Also, check if the observation tube and intermediate attachment are not correctly mounted; if so, mount them correctly. For SZX-TR30 models, ensure the light path selector knob is correctly set to the desired position.
What to do if the image is not sharp on Olympus SZX-R?
If the image appears unsharp or lacks sufficient contrast, make sure the objective is correctly mounted until it stops. Also, check the objective front lens for dust and clean the lens surface if necessary.
How to fix incomplete binocular vision on Olympus SZX-R Microscope?
Incomplete binocular vision can occur if the interpupillary distance is not correctly adjusted; adjust it correctly. It may also happen if the diopter adjustment is incomplete; complete the diopter adjustment. Finally, ensure that you are using a pair of matched eyepieces.
What to do if specimen image blurs when zoom magnification is changed on Olympus SZX-R?
If the specimen image blurs when the zoom magnification is changed, the diopter ring may not be correctly adjusted. Adjust it correctly. Also, ensure that the specimen is in complete focus; focus the specimen correctly at a high magnification.
Why is there excessive image contrast on my Olympus SZX-R Microscope?
Excessive image contrast can occur if the aperture is stopped down excessively, especially when using the built-in aperture iris diaphragm and SZX-AS. To resolve this, open the aperture to the proper diameter.
What to do if coarse focus adjustment knobs rotate with too much resistance on Olympus Microscope?
If the coarse focus adjustment knobs rotate with too much resistance, the tension adjustment ring may be too tight. Loosen it properly.
Why does the zoom microscope body drop or specimen go out of focus during observation with my Olympus SZX-R Microscope?
If the zoom microscope body drops or the specimen goes out of focus during observation, the tension adjustment ring may be too loose. Tighten it properly.
Diagram illustrating the assembly sequence of microscope components.
Detailed instructions for the step-by-step assembly of microscope parts.
Prerequisite steps to be completed before commencing microscope observation.
Procedure outline for conducting microscope observations.
Guidance on the usage and handling of the microscope base and stage plate.
Procedures for adjusting the microscope body's position and the focusing mechanisms.
Instructions for setting interpupillary distance and performing diopter adjustments.
Manual for integrating TV cameras and performing photomicrography with the microscope.
Installation and operational guide for the SZX-EPA eyepoint adjuster accessory.
Instructions for mounting and utilizing the SZX-AS unit, covering aperture iris diaphragm operation.
Procedures for mounting and operating the drop prevention collar and auxiliary pillar.
Assembly and operational guidance for the SZX-2RE revolving nosepiece component.
Details on installing the SZX-STAD1 BX stage adapter type 1 and its compatible base units.
Instructions for mounting the SZX-STAD2 BX stage adapter type 2 with compatible stages.
Information regarding the SZH-STAD1 stage adapter, its functionalities, and assembly process.
General| Type | Stereo Microscope |
|---|---|
| Eyepieces | 10x, 20x |
| Illumination | LED transmitted and reflected light |
| Observation Methods | Brightfield, Darkfield |
| Camera Compatibility | Yes, with optional camera adapters |
| Stand Options | Various stands |
| Camera Port | Trinocular port for camera attachment |
To Next Page
