Olympus T32 - Manual Flash with OM-1 N (OM-1), OM-10 and Non-OM Cameras

MANUAL FLASH
WITH
OM-ln
(OM-l),
OM-10
AND
NON-OM
CAMERAS
,4,
--..L.
I
z.&*t)it-,..
Set
the aperture
on the camera lens
at the
value
which corresponds with the
planned
flash-to-sub-
ject
distance as shown in the calculator
panel.
Set
the shutter speed to 1/30 sec.
*
With the OM-1O
(set
at
AUTO,
and
T32
turned ON),
the
shutter speed
is
automatically
set
to
approx. 1/60 sec.,
allowing
flash
synchronization.
lf
you
want
to
use
a
shutter speed of 1/3O
sec.
or
slower, set the
mode
lever
to
"MANUAL
ADAPTER"
and the
Manual
Adapter to 1/30
or
slower.
Turn
the T32 on
and
press
the shutter release
after
the charge
signal
light
begins
glowing.
t
The
signal
light
goes
out
to
indicate
that
full
power
flash
has
been
emitted.
lf
you
want
to take
pictures
with existing
light,
turn the
T32 oft; the charge
lamp
goes
out
and the T32
will
not f
ire
even
when the capacitor
is
f
ully charged.
Set
the
flash
at the
"MANUAL
G
No.
32"
position.
t9
www.orphancameras.com