Taking pictures with [Auto]
1 Press the shutter button to take the rst frame.
2 Move the camera slightly in the direction of the
second frame.
Target mark
Pointer
Screen when combining
images from left to right
AUTOAUTO
MENU OK
Cancel
Save
3 Move the camera slowly so that the pointer and
the target mark overlap. The camera releases the
shutter automatically when the pointer and the
target overlap.
Ɣ To combine only two frames, press the A button.
4 Repeat step 3 to take a third frame. The camera
automatically combines the frames into a single
panorama image.
Ɣ To cancel the panorama function, press the
button.
Ɣ If the shutter does not automatically release, try
[Manual] or [PC].
Taking pictures with [Manual]
1 Use FGHI to specify at which edge the next
picture is to be connected.
Direction for
combining frames
MANUALMANUAL
2 Press the shutter button to take the rst frame.
3 Compose the next shot so that the edge of the
rst frame displayed faintly on the screen overlaps
the subject of the second frame, and press the
shutter button.
Ɣ To combine only two frames, press the A button.
4 Repeat step 3 to take a third frame. The camera
automatically combines the frames into a single
panorama image.
To Next Page
Loading...
