Olympus TG-2 - Usb Connection

44
EN
Using an Eye-Fi card
Using an Eye-Fi card
d
d
[Eye-Fi]
[Eye-Fi]
Submenu 2 Application
All Transfers all images.
Sel. Image Transfers only selected image.
Off Disable Eye-Fi communication.
Ɣ When using an Eye-Fi card, read the Eye-Fi card
instruction manual carefully, and comply with the
instructions.
Ɣ This camera does not support the Eye-Fi card’s
Endless mode.
Ɣ Before use, refer to “FlashAir/Eye-Fi card” (p. 79).
Saving custom settings
Saving custom settings
d
d
[Custom Mode Setup]
[Custom Mode Setup]
The screen to select the Custom Mode 1 or Custom
Mode 2 is displayed.
Submenu 2 Application
Set Save current settings.
Reset Return to the default setting.
Selecting a method for connecting
Selecting a method for connecting
the camera to other devices
the camera to other devices
d
d
[USB Connection]
[USB Connection]
Submenu 2 Application
Auto
Set to select the connection
method each time the camera is
connected to another device.
Storage Connect camera as a card reader.
MTP
For Windows Vista/Windows 7/
Windows 8, connect camera as a
portable device.
Print
Select when connecting to a
PictBridge-compatible printer.
Ɣ When using the supplied software, select [Storage].
Ɣ Refer to “Connecting with a computer” (p. 56) for the
connection method with a computer.