Operating the camera by tapping the body
Operating the camera by tapping the body
[Tap Control]
Submenu 1 Submenu 2 Submenu 3 Application
Tough Settings Tap Control
Off Cancels [Tap Control].
On [Tap Control] is activated.
Calibrate
Adjusts the tap strength and intervals
between multiple taps on each side of the
camera body. (top, left, right, & back)
Operating during shooting mode (Example: Flash mode)
Operating during shooting mode (Example: Flash mode)
1
Tap the right or left side of the camera body once.
Ɣ The ash mode selection screen is displayed.
2
Tap the right or left side of the camera body to select a function.
3
Tap the back of the camera body twice to con rm your selection.
MENUMENU
Flash Auto
0.00.0
12
M
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
4:3
Take a picture: Tap the back of the camera twice (Only for the [a Snow] mode).
Ɣ Tap the camera rmly using the pad of your nger.
Ɣ When the camera is stabilized on a tripod for example, tap control may not work properly.
Ɣ To prevent dropping the camera when using tap control, strap the camera to your wrist.