Olympus TG-2 - Erasing images [Erase]

41
EN
2 Select the new landmark to be recorded on the
image using FG, and press the A button.
3 Select [OK] using FG, and press the A button.
Rotating images
Rotating images
q
q
[
[
y
y
]
]
Submenu 1 Submenu 2
Edit
y
1 Use HI to select an image.
2 Press the A button to rotate the image.
3 If necessary, repeat Steps 1 and 2 to make
settings for other images, and press the 
button.
Ɣ The new picture orientations will be saved even
after the power is turned off.
Erasing images
Erasing images
q
q
[Erase]
[Erase]
Submenu 2 Application
All Erase
All images in the internal memory
or card will be erased.
Sel. Image
Images are individually selected
and erased.
Erase Deletes the image displayed.
Erase Group
All images in the group are
erased.
Ɣ When erasing pictures in the internal memory, do
not insert the card into the camera.
Ɣ Protected images cannot be erased.
To individually select and erase images
To individually select and erase images
[Sel. Image]
[Sel. Image]
1 Use FG to select [Sel. Image], and press the
A button.
2 Use FGHI to select the image to be erased,
and press the A button to add a R mark to the
image.
Ɣ Press the T button to the single frame display.
Sel. Image (1)
Erase/Cancel
OK
MENU
4/304/30
R mark