EN-2 Vanta — Getting Started Guide
Connections
AC Power Adaptor
An AC power adaptor is provided with every Vanta XRF analyzer. This adaptor is used to power the
Vanta with or without a battery installed and to charge the rechargeable lithium-ion battery while
installed in the analyzer. It is also used to power the docking station.
To Charge the Battery
Plug the DC power plug of the AC power adaptor into the DC power socket of the Vanta
analyzer.
The Vanta charges the internal battery while it is connected to the AC adaptor.
OR
Plug the DC power plug into the back of the docking station, and then place the battery in the
spare battery dock.
DC power socket
5-pin mini USB connector
microSD port
USB A connector
USB A connector
To Next Page
Loading...
Need help?
General
