Olympus Vanta VMR User Manual

Vanta — Getting Started Guide EN-3
To Replace the Battery
1. Grasp the Vanta handle and press the two hinged battery release buttons. The buttons are located
on opposite sides of the handle.
2. Pull the handle end out to remove the current battery.
3. Align the contacts of a fully charged battery with the contacts in the Vanta handle, and then insert
the battery into the handle.
The handle is keyed so that the battery can only be inserted one way.
4. Push the battery into the handle until the battery release buttons engage and lock into place.
Press here.

Olympus Vanta VMR Specifications

General

Brand	Olympus
Model	Vanta VMR
Category	Measuring Instruments
Language	English