29
4
EN
Menu setting method
Menu setting method
R e c M e n u
Rec Level
Recording sensitivity is adjustable to meet
recording needs.
1 Select [ Rec Level ] from the menu
on the [ Rec Menu ].
[ High ]:
High recording sensitivity suitable for
conferences with many participants
and recording audio at a distance or
low volume.
[ Low ]:
Standard recording sensitivity
suitable for dictation.
Note
• When you would like to clearly record a
speaker’s voice, set [ Rec Level ] to [ Low ]
and hold recorder’s built-in microphone
close to the speaker’s mouth (5-10 cm).
R e c M o d e
Besides stereo * and monaural recording,
you can also select recording with priority to
sound quality, and recording with priority to
recording time. Select the recording mode
appropriate to your needs.
* VN-713PC, VN-712PC only
1 Select [ Rec Mode ] from the menu
on the [ Rec Menu ].
When [ MP3 ]* is selected:
Stereo recording
[ 192kbps ], [ 128kbps ]
Monaural recording
[ 48kbps ]
* VN-713PC, VN-712PC only
W h e n [ WMA ] is selected:
Monaural recording
[ 32kbps ], [ 16kbps ], [ 5kbps
]
Notes
• If a recording is made in stereo modes
([ 192 kbps ] or [ 128 kbps ]), it will be a
monaural recording through the built-in
microphone, and the same audio will be
recorded to both Left channel (Lch) and
Right channel (Rch).
• To record a meeting and lecture clearly,
set other than [ 5kbps ] in [ Rec Mode ].
For VN-713PC, VN-712PC:
• When an external monaural microphone
is used while [
Rec Mode ] is set to a stereo
recording mode, audio will be recorded
to the L channel only.
Low Cut Filter
The recorder has a Low Cut Filter function to
minimize low-frequency sounds and record
voices more clearly.
1 Select [ Low Cut Filter ] from the
menu on the [ Rec Menu ].
[ On ]:
Enables the Low Cut Filter function.
[ Off ]:
Disables this function.
To Next Page
Loading...
