Olympus VN-722PC - Setting a Skip Space [Skip Space]

4
Playback menu [Play Menu]
43
EN
Playback menu [Play Menu]
When [ Simple Mode ] was selected
1
Press the + / – button to select [ File
Skip ], [ 05sec 10sec 9 ] or
[ 05min 10min 9 ].
[File Skip]:
Skips in units of files.
[05sec 10sec 9]:
Pressing the 0 button rewinds 5
seconds; pressing the 9 button
fast-forwards 10 seconds and then
the playback starts.
[05min 10min 9]:
Pressing the 0 button rewinds 5
minutes; pressing the 9 button
fast-forwards 10 minutes and then
the playback starts.
NOTE
• F
orward/reverse skip operations over a
skip space that contains an index mark/
temp mark or the starting position of a
file will stop at that mark or at the start
position.
Setting a skip space
[Skip Space]
The [Skip Space] function lets you skip
a preset amount forward (forward skip)
or backward (reverse skip) in a file during
playback. It is handy for quickly moving the
playback position, or for repeated playback of
a short segment.
When [
Normal Mode ] was selected
1
Press the + / – button to select
[ Forward Skip ] or [ Reverse Skip ].
[Forward Skip]:
Starts playback after moving the
playback position forward by the set
amount.
[Reverse Skip]:
Starts playback after moving the
playback position backward by the set
amount.
2
Press the + / – button to select a
setting.
When [ Forward Skip ] was selected:
[File Skip], [10 sec. Skip], [30 sec. Skip],
[1 min. Skip], [5 min. Skip], [10 min. Skip]
When [ Reverse Skip ] was selected:
[File Skip], [1 sec. Skip] to [3 sec. Skip],
[5sec. Skip], [10 sec. Skip], [30 sec. Skip],
[1 min. Skip], [5 min. Skip]