Olympus VN-733PC - Setting a Skip Space [Skip Space]

4
Playback menu [Play Menu]
43
EN
Playback menu [Play Menu]
Setting a skip space
[Skip Space]
The [Skip Space] function lets you skip
a preset amount forward (forward skip)
or backward (reverse skip) in a file during
playback. It is handy for quickly moving the
playback position, or for repeated playback of
a short segment.
When [
Normal Mode ] was selected
1
Press the + / – button to select
[ Forward Skip ] or [ Reverse Skip ].
[Forward Skip]:
Starts playback after moving the
playback position forward by the set
amount.
[Reverse Skip]:
Starts playback after moving the
playback position backward by the set
amount.
2
Press the + / – button to select a
setting.
When [ Forward Skip ] was selected:
[File Skip], [10 sec. Skip], [30 sec. Skip],
[1 min. Skip], [5 min. Skip], [10 min. Skip]
When [ Reverse Skip ] was selected:
[File Skip], [1 sec. Skip] to [3 sec. Skip],
[5sec. Skip], [10 sec. Skip], [30 sec. Skip],
[1 min. Skip], [5 min. Skip]
[Repeat]:
Repeatedly plays the files in the set
range.
2
Press the + / – to button select a
setting.
When [ Playback range ] was selected:
[File]:
Stops playback after the current file
has been played.
[Folder]:
Plays all the files in the current folder
consecutively, stopping playback after
the last file in the folder is played.
When [
Repeat ] was selected:
[On]:
The files in the specified playback
range are played repeatedly.
[Off]:
Cancels repeat playback.
NOTE
• When [Pla
yback range] is set to [File],
[End] blinks in the display for 2 seconds
after the last file in the folder has been
played, then playback stops at the start
position of the last file.
• When [Playback range] is set to
[Folder], [End] blinks in the display for
2 seconds after the last file in the folder
has been played, then playback stops
at the start position of the first file in
the folder.