41
4
Menu setting method
Menu setting method
2 Adjust the surround level or bass
effect level.
[High] [Middle] [Low]:
The sound quality can be adjusted to
one of 3 levels.
[Off]:
Disables this function.
• The SRS WOW XT e ect will be weakened
if the bit rate for any music le is less than
32 kbps.
• Depending on the song, the SRS WOW XT
e ect will be heightened, and may sound
like noise. If this happens, adjust the
SRS WOW XT e ect.
• Set [WOW] to [Off] to use the slow
playback or fast playback mode.
Otherwise you cannot use these functions
(☞ P.42).
Equalizer
If you change the equalizer setting, you can
enjoy the music with your favorite sound
quality.
1 Select the desired equalizer
characteristics.
[Off]:
Disables the equalizer function.
[Rock] [Pop] [Jazz]:
Enables the equalizer function.
[User]:
Select [User] to save your own
custom equalizer settings. If [User] is
selected, proceed to Step 2.
2 Select the frequency band.
[60 Hz] [250 Hz] [1 kHz] [4 kHz] [12 kHz]:
Select the frequency bandwidth
setting.
3 Select the equalizer level.
• You can select the equalizer level from [–6]
to [+6
] in 1dB increments.
• The higher the decibel value, the louder
the sound.
• To change the settings again, press the
9 or 0 button and repeat the
procedure from step 2.
Play Mode
You can select the playback mode that fits
your preference.
Select the desired playback range:
1 Select [
Play Area
].
2 Select [
File
], [
Folder
] or [
All
].
[File]:
Selects the current file.
[Folder]:
Selects the current folder.
[All]:
Selects all files in the internal
memory.
Select the desired playback mode:
1 Select [
Repeat
] or [
Random
].
[Repeat]:
Sets to repeat playback mode.
[Random]:
Sets to random playback mode.
2 Select [
On
] or [
Off
].
[On]:
Sets the playback range to be played
back repeatedly or randomly.
[Off]:
Disables this function.
" For WS-560M/WS-550M:
Set to [MUSIC] mode.
To Next Page
Loading...
