50
5
Connecting to your PC
• [Remote] is appeared on recorder if
the USB cable is connected.
Connecting to your PC
1 Boot the PC.
2 Slide the USB connector slide
lever in the direction indicated
by the arrow to eject the USB
connector out of the recorder.
3 Connect to the PC's USB port or
to a USB hub.
Windows:
When you open [My Computer], it will
be recognized by the drive name of the
product name.
Macintosh:
When you connect the recorder to a Mac
OS, it will be recognized by the drive name
of the product name on the desktop.
Notes
• Refer to the user’s manual for your PC
regarding the USB port on your PC.
• Be sure to push the cable connector all the
way in. Otherwise, the recorder may not
operate properly.
• Use the supplied USB extension cable
depending on situations.
• Do not use USB extension cables other
than the supplied cable.
Using cables from other manufacturers
could result in damage to the recorder. Do
not use the supplied USB extension cable
with devices from other manufacturers.
To Next Page
Loading...
