Olympus WS-560M - Formatting the Recorder [Format]

46
4
Menu setting method
+− button
9 0 button
OK ` button
MENU button
Menu setting method
Formatting the Recorder [Format]
If you format the recorder, all files will be
removed and all function settings will return
to defaults except date and time settings.
Transfer any important files to a computer
before formatting the recorder.
1 While the recorder is during stop
mode, press the MENU button.
• The menu will appear on the display
(☞ P. 36).
2 Press the + or − button to select
[ Device Menu ] tab.
• You can change the menu display by
moving the settings tab cursor.
3 Press the OK ` or 9 button.
4 Press the
+ or − button to select
[ Format ].
6 Press the + button to select
[ Start ].
8 Press the + button again to select
[ Start ].
5 Press the OK ` or 9 button.
• [Format] will appear on the display.
7 Press the OK ` button.
• After the [Data will be cleared]
message is on for two seconds, [Start]
and [Cancel] will turn on.