EasyManua.ls Logo

OMB EM 100 DIG - TREATMENT FOR BURNS

OMB EM 100 DIG
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
FM Transmitter
Sistemas Electrónicos S.A EM 100 DIG
Technical Manual - v1.2 - November 2005 5
Step 4
Put the fingertips of your hand on the Adam's apple, slide them into the groove
next to the windpipe. Feel for a pulse. If you can not feel a pulse or are unsure,
move on to the next step.
Step 5
Position your hands in the center of the chest between the nipples. Place one
hand on top of the other.
Step 6
Push down firmly two inches. Push on chest 15 times.
CONTINUE WITH 2 BREATHS AND 15 PUMPS UNTIL HELP ARRIVES.
TREATMENT FOR BURNS
Continue treating victim for electrical shock.
Check for points of entry and exit of current.
Cover burned surface with a clean dressing.
Remove all clothing from the injured area, but cut around any clothing that adheres to the skin
and leave it in place. Keep the patient covered, except the injured part, since there is a tendency to
chill.
Splint all fractures. (Violent muscle contractions caused by the electricity may result in fractures.)
Never allow burned surfaces to be in contact with each other, such as: areas between the fingers
or toes, the ears and the side of the head, the undersurface of the arm and the chest wall, the folds
of the groin, and similar places.
Transport the victim as soon as possible to a medical facility.

Table of Contents

Related product manuals