Omcan HLC300 - Technical Specifications; Installation and Setup; Installation Requirements and Location; Electrical Connection Requirements

4
Safety and Warranty
Technical Specications
Installation
HP 0.75
DiscSpeed 270RPM
MouthOpening 5.11”×2.16”
Electrical 110V/60/1
Weight 50.6lbs.
Dimensions(DWH) 19”×9”×19.70”
1 YEAR WARRANTY
WARNING:
Thepackagingcomponentsareclassiedasnormalsolidurbanwasteandcanthereforebedisposedof
withoutdifculty.
In any case, for suitable recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Themachineconnectionandthesettingatworkmustbemadebyskilledpersonnel.
WARNING
Boththesystemandlocationwheretheequipmentishastocomplywithalllocalregulations.Omcandenies
anyandallresponsibilityfordirectorindirectdamagedorinjurywhichmayensuefromnotcomplyingwiththe
abovementionedregulations.Settheequipmentonawide,level,dryandxedarea.Theunitmustbefarfrom
heatandwatersources.
ELECTRIC CONNECTIONS
Theequipmentissuppliedwithanelectriccabletobeconnectedtoamagentothermicmainswitch.Itis
imperativethattheequipmentisproperlygroundedaccordingandcomplieswithallregulations.