Need help?Do you have a question about the Omega Engineering FMA-1600A Series and is the answer not in the manual?
General| Brand | Omega Engineering |
|---|---|
| Model | FMA-1600A Series |
| Category | Measuring Instruments |
| Language | English |
Guidance on connecting the meter to process lines, including fittings and sealants.
Pin assignment table for the 8-pin Mini-DIN connector used for power and signals.
Connecting digital serial communication signals for input.
Details on 0-5 Vdc, 0-10 Vdc, and 4-20 mA analog output signals.
The primary screen showing flow, pressure, and temperature readings.
Procedure for zeroing the flow meter for accurate measurements.
Interpreting and resolving error codes displayed on the screen.
Menu for choosing the gas being measured for accurate readings.
Menu for configuring serial communication settings like Unit ID and Baud rate.
Setting up terminal software for serial communication with the device.
Using serial commands to manage custom gas mixtures.
Capturing real-time data from the meter into a text file.
Addressing fixed zero or full-scale readings, or negative flow readings.
Interpreting and resolving flashing parameter error messages (MOV, VOV, POV, TOV).
Key performance metrics like accuracy, repeatability, and response time.
Flow range, pressure drop, mechanical dimensions, and process connections.
To Next Page
