44
Using the rotating bezel (fig. 10)
: keep the pusher (A) pressed
down to turn the bezel.
Using the crown (fig. 10): the crown (B) must be unscrewed before
it can be used, when the crown protection (C) will slide without turn
-
ing. After use, push the crown to position 1, then press and screw the
crown down again (to ensure the water resistance of the case).
Note: the crown is located at 9 o’clock, but its functions are identical.
fig.
10
Ploprof bezel and crown
Specific sections/general information3
To Next Page
Loading...
