BB702 Introduction
1
1-2
IEC symbols Description
Figure 1. IEC symbols
1.3 General Description
The Model BB702 is a portable, rugged, bench-top, blackbody calibration source
with a built-in precision PID digital controller. The calibrator is used to test
and calibrate infrared pyrometers. The 2.5 inch Diameter target plate has an
emissivity of 0.95 and can be set to any temperature between ambient +11 to
215°C (ambient +20 to 420°F).
Caution, risk of electric shock
Caution, refer to accompanying
documents
Caution, hot surface
230 VAC @50/60Hz (European Models)
115 VAC @50/60Hz (Domestic Models)
To Next Page
Loading...
