Omega CT485B-110V-G-AL - Using the Remote Sensor Cable

2.6.2 Using the Remote Sensor Cable
1. Connect the end of the cable with the arrow to the short cable on the sensor.
Line up the two arrows as shown in Figure 2-16 before mating the two cables.
2. Connect the other end of the remote sensor cable (without the arrow) to the
socket at the side of the recorder.
Figure 2-16. Using the Remote Sensor Cable
For accurate temperature and humidity readings, only one
length of remote sensor cable may be used.
NOTE
RH
°F
°C
T
E
M
P
E
R
A
T
U
R
E
H 35 T 2H 35 T 2
Setting Up the Recorder
2
2-12