Specifications
11-1
11
General
Measurement Input: Temperature and humidity, with plug-in external
sensor
Removable for remote location (up to six feet)
Temperature
Range: 2° to 120°F, –17° to 49°C
Accuracy: ±1°C
Sensor: Solid State
Response Time: 5 minutes for 63% step change
Display Resolution: 1°F/1°C
Humidity
Range: 2% to 98% RH
Accuracy: ±3% @ 25°C, between 20% and 90% of range;
±5% below 20%, above 90% @25°C
Sensor: Resistive polymer
Response Time: 5 minutes for a 30% to 80% step change
Display Resolution: 1% RH
Display
Types: 2
1
⁄2 digit backlit LCD, 0.5” high; low battery and
parameter indication
Display Modes User-switchable between °F°,°C and %RH for
continuous display; max/min storage for both
temperature and humidity
Electronics
Type: Microprocessor-controlled and linearized HI &
LO Peak Hold for both temperature and humidity;
re-initializes position at every chart change
(every time door is opened)
Chart Paper
Type: 8 inch (200mm) circular, double-sided, with
linear radial divisions; 1, 7 and 32 day with both
°F and °C scales
To Next Page
Loading...
