SECTION 1. INTRODUCTION
1.1 UNPACKING
Remove the Packing List and verify that you have received all equipment. If
there are any questions about the shipment, use the phone numbers listed on the
back cover to contact the Customer Service Department nearest you.
Upon receipt of shipment, inspect the container and equipment for any signs of
damage. Note any evidence of rough handling in transit. Immediately report any
damage to the shipping agent.
The carrier will not honor any claims unless all shipping material is
saved for their examination. After examining and removing contents,
save packing material and carton in the event reshipment is necessary.
Verify that you receive the following items in the shipping box:
QTY DESCRIPTION
1 Programmable indicator/controller with all applicable connectors
attached.
1 Owner’s Manual
1 Quick Start Manual
If you ordered any of the available options (except the “BL” blank Lens
option), they will be shipped in a separate container to avoid any
damage to your indicator/controler.
1
To Next Page
Loading...
