Need help?Do you have a question about the Omega DPF20 Series and is the answer not in the manual?
General| Accuracy | ±0.25% FS |
|---|---|
| Operating Temperature | -20 to 85°C (-4 to 185°F) |
| Display | LCD |
| Power | 9 to 30 Vdc |
| Measurement Range | 0 to 1000 psi |
| Output | 4 to 20 mA |
| Power Supply | 12-30 VDC |
| Process Connection | 1/4 NPT male |
| Housing Material | Stainless Steel |
| Diaphragm Material | 316L stainless steel |
Process for handling warranty and repair requests.
Guide for selecting and ordering the DPF20 panel meter.
Explanation of the 5 selectable impulse counter modes.
Details on the 2 selectable ratemeter modes.
Description of the periodmeter mode.
Overview of the instrument's key functions and their sections.
Identification of front panel controls and indicators.
Instructions for connecting power to the instrument.
Guidance on connecting and configuring various sensor types.
Identification of rear panel components and terminals.
Diagram and explanation of input signal connections.
Detailed technical data including digits, reading, signals, power.
Physical dimensions and panel cut-out specifications.
Explanation of the trigger level adjustment and detection.
How to use the cycle counter feature with alarm setpoints.
Details on the SLOW mode for low frequency applications.
Details on the FAST mode for high frequency counting.
Guide to navigating the instrument's menus.
List and explanation of instrument error messages.
Detailed guide to instrument configuration options and menus.
Details on relay, transistor, and SSR output modules.
Configuration and types of analog output modules.
Configuration and registers for Modbus RTU communication.
RS-485 ASCII port configuration and frame structure.
RS-232 ASCII port configuration and communication.
Details on relay output modules with 2, 4, or 6 relays.
Step-by-step guide to safely open the instrument housing.
Step-by-step guide to correctly close the instrument housing.
To Next Page
