9
Meter Function Menus
9-20
MENU MIN/MAX/MENU *
BUTTON BUTTON
MAIN MENU SUB MENU DESCRIPTION
Alarm 2 open-collector or relay output
Active ON or OFF:
“ALC.5=0”On
“ALC.5=1” Off
Filtered/unfiltered reading compared
with Alarm 2 (Setpoint 4) value:
“ALC.6=0” Unfiltered
“ALC.6=1” Filtered
Alarms 1 & 2 (Setpoints 3 & 4) action
and LEDs:
“ALC.7=0” Enabled
“ALC.7=1” Disabled
Alarm reset at P2-11 connector:
“ALC.8=0” Disabled
“ALC.8=1” Enabled
* The ‘MIN’ button allows you to sequence through ALC.1, ALC.2, ALC.3,
ALC.4, ALC.5, ALC.6, ALC.7 and ALC.8.
The ‘MAX’ button allows you to select the “0” or “1” state for each “ALC”
condition.The ‘MENU’ button stores the selected values for each “ALC”
condition changed and advances the meter to the next configuration
(“AL FNC”).
Every underlined “0” or “1” is the factory preset value.
To Next Page
Loading...
